1999 Ski-Doo Factory Shop Manual Volume Three, Page 198Get this manual

1999 Ski-Doo Factory Shop Manual Volume Three, Page 198

Section 05 TRANSMISSION Subsection 07 (CHAINCASE)
5,16, Sprockets
Position the sprockets with the writing facing the chaincase coverSprocket hub faces toward chaincase
This initial adjustment should provide 3-5 mm (18-1364 in) free-play when measured at the outer circumference of the brake disc
4, Upper Sprocket Castellated Nut
Torque to 45 to 75 Nm (33 to 55 lbfft)Install new cotter pin in the position shown-
CAUTION

Free-play must not exceed mm (1364 in), readjust if necessary

CAUTION

WARNING

When removing cotter pin always replace with new one
If the specified free-play is not reached with the tensioner screw fully tightened, replace chain and check the condition of sprockets
CAUTION

21, Chaincase Oil
Pour 250 mL (8.5 U.Soz) of synthetic chaincase oil (PN 413 803 300) into chaincaseNOTE: Chaincase oil capacity is 250 mL (8.5 U.Soz)Check oil level with the dipstick then add if requiredRemove metal particles from magnet