1999 Ski-Doo Factory Shop Manual Volume Three, Page 177Get this manual
Section 05 TRANSMISSION Subsection 03 (DRIVE PULLEY)
A16D0BA
A16D0DA
1Head on top 2All on the same side
CAUTION
Install and torque screws to 13 Nm (115 lbfin)
Lever assemblies must be installed so that cotter pins are on the same sideTorque nuts to 12 Nm (106 lbfin)
6,25,29, Sliding Half, Slider Shoe and Governor Cup
To install governor cup, use following tool: