1999 Ski-Doo Factory Shop Manual Volume Three, Page 143Get this manual

1999 Ski-Doo Factory Shop Manual Volume Three, Page 143

Section 04 ENGINE Subsection 08 (CARBURETOR AND FUEL PUMP)
VM Type Carburetor Unscrew carburetor cover no1 then pull out throttle slide no5 from carburetor
WARNING

Exercise care when handling throttle slideScratches incurred may cause throttle slide to stick open in operationDisconnect throttle cable from throttle slide
TM Type Carburetor Disconnect throttle cable from throttle shaftDisconnect choke cableAll Models Remove carburetors from engineVM Type Carburetor Unscrew choke plunger from each carburetor
Check inlet needle tip conditionIf worn, the inlet needle and seat must be replaced as matched setNOTE: Install needle valve for snowmobile carburetor onlyIt is designed to operate with fuel pump systemCheck throttle slide for wearReplace as necessaryCheck idle speed screw straightnessReplace as necessaryCheck for fuel soaked into float no12; replace as necessaryCheck float for cracks or other damages affecting free movement; replace as necessaryInspect throttle cable and housing for any damagesReplace as necessary