1999 Ski-Doo Factory Shop Manual Volume One, Page 330Get this manual
Section 08 STEERINGFRONT SUSPENSION Subsection 02 (STEERING SYSTEM)
A05G09A
LONG TIE ROD SHOWN 1Ball joint parallel with arm
Ensure that pivot arm is still centered and check ski toe-out
Raise front of vehicle so that skis are off the groundLoosen lock nuts of long tie rods and turn each tie rod so that skis are in straight ahead positionTo adjust toe-out, slightly turn both tie rods exactly the same amountCheck external threaded length not engaged and firmly retighten nuts as specified aboveNOTE: To make sure skis are in straight-ahead position, place straight edge against pre-adjusted track and measure distance between front and rear of skis and straight edgeDistances should be equalAfter ski toe-out adjustment, distance at front of ski must be 3.0 mm (18 in) more than at rear on both sides for total toe-out of mm (14 in)