1999 Ski-Doo Factory Shop Manual Volume One, Page 303Get this manual
Section 07 REAR SUSPENSION Subsection 02 (TORQUE REACTION SUSPENSION)
For normal use, locate bolt through 3rd hole from strap endA
WARNING
Always torque the nut to 11 Nm (97 lbfin)Replace strap if worn or torn
A05F0FA
Turn adjustment cam by hand to the desired position Reinstall spring on its support making sure that it sits in the groove of support
Stopper Strap
The function of the stopper strap is to control the transfer of vehicle weight during acceleration and to control track lead angleThe longer the belt, the more the weight will be transferred to the track to provide better tractionThe shorter the belt, the lesser the weight transferred to the track, thus maintaining more positive steeringThe longer the belt, the greater will be the track lead angleA shorter belt will reduce track lead angle which may help when negotiating particular snow conditionAdjusting holes on the stopper strap allow to adjust it according to driver's requirements, field andor snow conditions