1999 Ski-Doo Factory Shop Manual Volume One, Page 281Get this manual
Section 06 ELECTRICAL Subsection 06 (TESTING PROCEDURE)
IGNITION SYSTEM TESTING (Tundra) PART TEST TO BE PERFORMED WIRE COLOR MULTIMETER PROBE CONNECTION 2-02-2-M and 2-02-1-M 2-02-2-M and 2-02-1-M 4-02-1-M and 4-02-2-M 4-02-2-M and 2-02-1-F 4-02-1-M and 2-02-2-F 4-02-1-M and engine 4-01-2 and 4-01-1-F 4-01-2 and 4-01-1-M Spark plug cap and 4-01-2 RESISTANCE VALUE (OHMS) 0.L 00.0 00.5 40.0 76.0 00.0 00.5 00.0 00.5 00.0 00.5 MULTIMETER SCALE 00.0 VOLTAGE VALUE (VOLTS) MULTIMETER SCALE No stop switch must be operationalAt least one stop switch must be operationalNo stop switch must be operational NOTE
Stop switch
Running insulation Continuity in stop position
BK and BKYL BK and BKYL BK and BKRE BKRE BKYL BK and BK BK and BK BK and WHB BK
00.0 00.0 00.0 00.0 00.0
Ignition generator coil
Output Stop wire continuity Ground continuity Ground continuity
The term "engine" refers to the engine metal parts connected to the magneto housingDisconnect WHBL wire from coil in order to take measurementsDisconnect WHBL wire from coil in order to take measurements