1999 Ski-Doo Factory Shop Manual Volume One, Page 201Get this manual
Section 05 TRANSMISSION Subsection 04 (DRIVEN PULLEY)
13,14,15, Fixed Pulley Half, Brake Disc and Screw
Install brake disc on fixed pulley half and torque screws to 15 Nm (115 lbfin)
INSTALLATION
Follow installation procedure for Tundra driven pulley at beginning of this subsection
ADJUSTMENT
11,12, Shim
NOTE: The following adjustment must be performed with new drive beltFor best performance, particularly at starting, top of drive belt should be flush with top of driven pulley halves
A07E0CA