1999 Ski-Doo Factory Shop Manual Volume One, Page 199Get this manual
Section 05 TRANSMISSION Subsection 04 (DRIVEN PULLEY)
Remove tool and cam no3Remove spring no4 and sliding half no10
5, Large Bushing
Remove screws no6 with washers and pry bushing no5 out
8, Sliding Half Small Bushing
To remove worn bushing no8, use screwdriver and pull out circlip no7INSPECTION
2,9, Slider Shoe
Black slider shoeforward Red slider shoereverse Check cam slider shoes for wearReplace when inside edge of cam slider shoe slope base is worn to mm (.039 in) or less
A15D0OA
A05D0ZB
1Remove circlip
1Measure thickness of slope base here 2Sliding pulley side 3Slop base