1999 Ski-Doo Factory Shop Manual Volume One, Page 158Get this manual
Section 04 ENGINE Subsection 09 (CARBURETOR AND FUEL PUMP)
IDENTIFICATION
All carburetors are identified on their body
NOTE: For fine tuning refer to TECHNICAL DATA 10 and to SPARK PLUG 06-03NOTE: For high altitude regions, the High Altitude Technical Data Booklet (PN 484 300 003 and 484 054 500 for binder) gives information about calibration according to altitude and temperature
REMOVAL
Remove air silencer(s)For S-Series, see BATTERY 06-05Disconnect fuel inlet lineDisconnect primer line from carburetor on some modelsDisconnect choke cable on some modelsUnscrew carburetor cover no1 then pull out throttle slide no5 from carburetor
A01C59A
1Identification: 34-482
WARNING
CARBURETOR CIRCUIT OPERATION VERSUS THROTTLE OPENING
The following illustration shows the part of the carburetor which begins and stops to function at different throttle slide openingsNote that the wider part of symbol corresponds to the opening mostly affectedFor instance, throttle slide cutaway begins to function at closed position but it is most effective at 14 opening and decreases up to 12 openingThrottle slide openings Wide open 34 12 14 18 13,6, 5, 3, 14, 8,