1997 Ski-Doo Factory Shop Manual Volume Two, Page 288Get this manual

1997 Ski-Doo Factory Shop Manual Volume Two, Page 288

Section 07 STEERINGFRONT SUSPENSION Sub-Section 02 (STEERING SYSTEM)
Skandic WT Only Skis should have toe-out of 10 mm (38 in) when they are in straight-ahead position and the vehicle is resting on the groundNOTE: To make sure skis are in straightahead position, place straight edge against pre-adjusted track and measure the distance between front and rear of skis and straight edgeDistances should be equalAfter the ski toe-out adjustment, distance at front of ski must be mm (316 in) more than at rear on both sides for total toe-out of 10 mm (38 in)
LUBRICATION

WARNING

Do not lubricate throttle andor brake cable, housing and spring coupler bolts
26, Grease Fittings
Only use low temperature grease (PN 413 7061 00)The following symbols will be used to show what type of lubricant should be used at the suitable locations1 2