1997 Ski-Doo Factory Shop Manual Volume Two, Page 258Get this manual
Sub-Section 02
Section 06 REAR SUSPENSION (SC-10 SUSPENSIONS (ALL VERSIONS))
If the seal carrier assembly is replaced, use seal pilot (PN 529 0265 00) to guide seal over damper shaftLubricate seal carrier guide pilot before use
FRONT QTY Spacer Extension shims Piston slit Compression shims Spacer 30 mm (1.180 in) 15 mm (0.590) CENTER 0.152 mm (0.006 in) 0.114 mm (0.0045 in) mm (in) 12 mm (0.472 in) 26 mm (1.020 in) Thick mm (in) 0.023 mm (0.008 in) 0.203 mm (0.008 in)
CAUTION
Failure to use seal pilot will result in seal damageReassemble damper rod assembly, using care to properly assemble shim packs as required for your damping needs