1997 Ski-Doo Factory Shop Manual Volume Two, Page 169Get this manual
Section 04 TRANSMISSION Sub-Section 06 (BRAKE)
A06D15A
INSTALLATION
To install brake, reverse removal procedure paying attention to the followingA15D03A
TYPICAL 1Fixed pad 2Inner caliper A1 mm (132 in) minimum
7, Brake Pad
WARNING
17, Brake Disc
Check for scoring, cracking or heat discoloration, replace as required
Avoid getting oil on brake padsDo not lubricate or apply antirust or antifreeze solution in brake cable
ASSEMBLY