1997 Ski-Doo Factory Shop Manual Volume Two, Page 160Get this manual
Section 04 TRANSMISSION Sub-Section 04 (DRIVEN PULLEY)
Turn puller handle and sliding half at once to extract the bushing
Coat cam interior with anti-seize lubricant
INSTALLATION
529 0313 00
14,15, Countershaft and Anti-seize Lubricant
529 0312 00
CAUTION
Always apply anti-seize lubricant (PN 413 7010 00) on the countershaft before final pulley installation
A03D1YA
IMPORTANT: Large bushing retaining screws and washers must be removed before small bushing installationCoat bushing outside diameter with Loctite 609 (PN 413 7031 00)Install bushing as following photo