1997 Ski-Doo Factory Shop Manual Volume Two, Page 87Get this manual
Sub-Section 04
Section 03 ENGINE (LEAK TEST AND ENGINE DIMENSION MEASUREMENT)
4Block both hoses of rotary valve gear lubrication system with hose pinchers
1Remove spark plug or any plug of leak tester kit on PTO sideIf pressure drops, it indicates defective crankshaft inner seal on PTO side2Remove spark plug or any plug of leak tester kit on MAG sideIf pressure drops, it indicates defective crankshaft inner seal on MAG side3Check drain hole below coolant pump housing with soapy water
A01B2YA
1Block both hoses
If leakage stops, ignore remaining items and check crankcase rotary valve gear reservoir as per Crankcase Rotary Valve Gear Reservoir of this section5Remove clutch then check crankshaft outer seal6Remove rewind starter and magneto system then check crankshaft outer seal7Check crankcase rotary valve gear reservoir