1997 Ski-Doo Factory Shop Manual Volume Three, Page 169Get this manual
Section 06 REAR SUSPENSION Sub-Section 02 (SC-10 SUSPENSION (HP VERSION))
At reassembly, wheel circlip must face outward
REMOVAL
Decrease spring preload by turning LH cam clockwise and RH cam counterclockwise
Loosen one screw then retighten Remove the opposite screw Remove the first oneUnscrew center idler wheel axle from tunnel then removeLift rear of vehicle at least (3 ft)
A03F0SA
A03F0WA
LH SIDE SHOWN
1At least (3 ft)