1997 Ski-Doo Factory Shop Manual Volume One, Page 254Get this manual
Section 07
STEERINGFRONT SUSPENSION Sub-Section 02 (STEERING SYSTEM)
INSPECTION
Check skis and runner shoes for wear, replace as necessary (see section 08-03)
31, Heating Grip Element
On vehicle equipped with heating grips, grips might be unremovable as explained earlier, in this case, carefully proceed as follows to prevent damaging heating elementsLocate the grip heater wires inside handlebarlook through end of gripStart cutting grip exactly opposite heater wires and immediately peel open to locate gap in heating element, as shown
17,36, Steering Arm and Ski Leg
Make sure steering arm and ski leg splines interlock (if applicable)WARNINGAll parts having worn splines have to be changed by new onesCheck general condition of steering systemCheck general condition of steering system components for wear and replace if necessary;
DISASSEMBLY AND ASSEMBLY
Grips can be removed and installed without any damage by injecting compressed air into the handlebar or by heating them with heat gun
1, Steering Column