1997 Ski-Doo Factory Shop Manual Volume One, Page 249Get this manual
Section 06 REAR SUSPENSION Sub-Section 05 (TRACK)
All Models CAUTIONToo much tension will result in power loss and excessive stress on suspension componentsIf too loose, the track will have tendency to thumpTo adjust, loosen the rear idler wheel retaining screws (one side only on Tundra II LT and S-Series) and the adjuster bolt lock nutthen loosen or tighten the adjuster bolts located on the inner side of the rear idler wheels-
A01F05A
1Guides 2Slider shoes 3Equal distance
; ment, ensure that the track is free of all particles which could be thrown out while
track is rotatingKeep hands, tools, feet and clothing clear of trackTo correct, stop engine then loosen the lock nuts and tighten the adjuster bolt on side where guides are farthest to slideTighten lock nuts and recheck alignment1 2