1997 Ski-Doo Factory Shop Manual Volume One, Page 227Get this manual
Section 06 REAR SUSPENSION Sub-Section 02 (TORQUE REACTION SUSPENSION)
COMPONENT REMOVAL
Lift rear of vehicle and support it off the ground
9,10,12, Nut, Slotted Screw and Slider Shoe
To replace worn shoe, remove the front screw and stop nut, then slide the shoe rearward out of the runnerNOTESlider shoe minimum thickness10 mm (2564 in)
5, Rear Arm
Release spring tensionUnfasten shock from rear armRemove screws retaining rear arm'
REMOVAL
NOTETo prevent cross shaft from turning when unscrewing screws assembled with threadlocker, proceed as followsLoosen one screw then retighten Remove the other screw Remove the first one
1,2,3,4, Cross Shaft, Idler Wheel, Spacer and Screw
Remove idler wheel ass'yLift rear of vehicle and support it off the groundUnscrew screws retaining front arm and rear arm to frameRemove suspensionA05F0IA