1997 Ski-Doo Factory Shop Manual Volume One, Page 212Get this manual
Section 05 ELECTRICAL Sub-Section 07 (TESTING PROCEDURE)
Test Condition
All tests are performed on the vehicle at cranking speed Vigorous manual cranking against compression causes the flywheel to snap over, raising the output higher than by cranking without compression, therefore, do not remove spark plugTest values listed are taken against compressionAlways crank vigorously as in actual startingAlways proceed in the following order1Connect tester and clip leads as illustrated for each specific test2Follow test procedure sequence3After every test that lights the indicator lamp, reset the indicator circuit by depressing the reset button