1997 Ski-Doo Factory Shop Manual Volume One, Page 148Get this manual
Section 04 TRANSMISSION Sub-Section 04 (DRIVEN PULLEY)
Turn puller handle and sliding half at once to extract the bushing
Coat cam interior with anti-seize lubricant
INSTALLATION
529 0313 00
14,15, Countershaft and Anti-seize Lubricant
529 0312 00
CAUTIONAlways apply anti-seize lubricant (P413 7010 00) on the countershaft before final pulley installation
A03D1YA
IMPORTANTLarge bushing retaining screws and washers must be removed before small bushing installationCoat bushing outside diameter with Loctite 609 (P413 7031 00)Install bushing as following photo