1997 Ski-Doo Factory Shop Manual Volume One, Page 90Get this manual
Section 03 ENGINE Sub-Section 05 (CDI SYSTEM)A01C2JA
1Protect harness from flame 2Heat
A25E0QA
CAUTIONProtect harness from flame
1Uncrimp and unsolder wire here
Strip end of old wire then crimp and solder on new coilApply Loctite 242 (blue) to screws nos6 and then install the new coil on armature plateUse magneto coil centering tool (PN 420 8769 22) and install it so that it fits around armature plate before tightening screws420 8769 22