1996 Ski-Doo Shop Manual, Volume 1, Page 205Get this manual
Se ion RAN SM SSI ON Sub-Section 06 (CHAINCASE)
11, Oil Seal
Clean chaincase bore with Loctite Safety Solvent (p 413 708200) then apply Loctite 609 to oil seal mounting surface (outside)Using an appropriate pusher, press the oil seal into chaincase hubOil seal must fit flush with the chaincase edgeNOTEShould installation procedure for countershaft be required, refer to BRAKE 05-05 then look for Brake disc and Countersh aft bearing adjustment
All Models
4Upper Sprocket Castellated Nut
Torque to 45 to 90 Nom (33 to 66 Ibfoft)Install new cotter pin in the position shownCAUTIONWhen removing cotter pin alv ways replace with new one
CAUTIONCotter pin will rub on chaincase cover if installed otherwise
5,16, Sprockets Position the sprockets with the writing facing the chaincase coverS-Series Only
2Conical Spring Washer