1996 Ski-Doo Shop Manual, Volume 1, Page 36Get this manual
Se ion LU BRI CAT ON AN AI EN AN CE Sub-Section 01 (LUBRICATION AND MAINTENANCE)
NO5 DRIVE BELT CONDITION
Inspect beIt for cracks, fraying or abnormal wear (uneven wear, wear on one side, missing cogs, cracked fabric)If abnormal wear is noted, probable cause could be pulley misalignment, excessive RPM with frozen track, fast starts without warm-up period, burred or rusty sheave, oil on belt or distorted spare beltCheck the drive belt widthReplace the drive belt if width is less than the minimum width recommended in DRIVE BELT 05-01
To remove scratches on windshield or hoodStart with "Slip Streamer Motorcycle Windshield Heavy Duty Scratch, Remover"Finish with "Slip Streamer Motorcycle Cleaner and Polish"
CAUTIONNever clean plastic parts or hood with strong detergent, decreasing agent, paint thinner, acetone, products containing chlorine, etcInspect the hood and repair any damageTouch up all metal spots where paint has been scratched offSpray all metal parts including shock chromed rods with antirust product (P 2936000 06)Wax the hood and the painted portion of the frame for better protectionNOTEApply wax on glossy finish onlyProtect the vehicle with cover to prevent dust accumulation during storageCAUTIONThe snowmobile has to be stored in cool and dry place and covered with an opaque tarpaulin This will prevent sun rays and grime from affecting plastic components and vehicle finish