1989 Ski-Doo Repair Manual, Page 442Get this manual
Section 05 SUSPENSION Sub-section 04 (SP SUSPENSION)
Lowest position
INSTALLATION
Install the shock assembly on vehicle and torque retaining bolts to 61 N-m (45 Ibf-ft)
A015 005 027
Spring collar
- Tighten spring removr screw until the spring collar can be removed- Unscrew spring remover screw until shock spring pressure is fully released and remove springInstallation is the reverse procedure
NOTE: The standard springs have different coil pitch at each endPosition the higher coil pitch at the top of the shock absorberA014 005 020