1989 Ski-Doo Repair Manual, Page 419Get this manual
Section 05 SUSPENSION Sub-section 02 (SLIDE SUSPENSION)
31, Sliding support
Sliding support must be installed with offset toward frontLowost position f1ight hand side
A007 005 004
1,4,8, Rear axle, adjustment screwspacer
A007 005 005
Unscrew adjustment screws as far as possible to push the rear axle forward Make sure each adjustment screw is engaged in spacer and rear axle holes
16,17,30,58, ScrewLoctite 242
Clean all screw threadsPrior to assembling, apply low temperature grease (PIN 4137061 00) on cross shafts and Loctite 242 or equivalent on threads