1989 Ski-Doo Repair Manual, Page 99Get this manual
Section 02 ENGINE Sub-section 04 (467 ENGINE TYPE)
ASSEMBLY
7,8,13,31, Crankshaft bearing, labyrinth sleevelubricant
Smear anti-seize lubricant (PfN 413 701000) on part of crankshaft where bearing fitsPrior to installation, place bearings into an oil container filled with oil previously heated to 75C (167FlThis will expand bearing and ease installationInstall bearings and labyrinth sleeve with groove as per the following iI- lustralion
5,19,20, Upper crankcaseLoctite 515lower crankcase
Crankcase halves are factory matched and therefore, are not interchangeable or available as single halvesPrior to joining of crankcase halves, apply light coat of Loctite 515 (PIN 413 702700) on mating surfaces