1986 Ski-Doo Factory Shop Manual, Page 410Get this manual
Section 05 SUSPENSION Sub-section 0.2 (SLIDE SUSPENSION)
37, Slider, pad
Install the wider edge on top leach side of the runner,)
6,13, Front arm bracketfront idler shaft
The front idler shaft must be positioned in the front hale of the front arm bracket
Wider edge ._ _on lOp
Wider edge
Rear of vehicle
CAUTION: Make sure slider pads are wen installed
Check sliding action when sliding supports are installed
37, Sliding support
Sliding support must be installed With offset toward front
7 t8 Rivetsadjustment plates
To remove the rivets securing the adjustment plate on