1986 Ski-Doo Factory Shop Manual, Page 345Get this manual
Section 03 TRANSMISSION Sub-section 08 (GEARBOX)
74, Drive axle holder
Hold drive axle witt1 tool PIN 529 0051 00
36, Pranet wheels and components
Loctite mounted shaft nut may require heat for disassemblyFor easier disassembly heat up to 150 (300 F)
a suitable pusher (15.96 mm
To remove bearing from planet wheels, use press and (58" ID maxl-
21Planet carrier bearing
Remove snap ring and use sUitable pusher to press bearing out of carrier
25, Blocking wheel (reverse driving hub)
semblyFor easier disassembly heat up to 150 (30QoFJDrive axle hoider
Loctite
mounted screws may require heat for disas-
CLEANING
Transmission casedriven pulley ass'y
Pull out of vehlcle
27,60, Transmission covercase
surfaces
Loctite
residue from cover and case mating
DISASSEMBLY
Driven pulley
Remove snap ring, support assemblydriven pulley and key from countershaft
INSPECTION
Visually inspect the components for excessive wear and damage
ASSEMBLY
25,34, Blocking wheel (reverse driving hub)