1986 Ski-Doo Factory Shop Manual, Page 262Get this manual
Section 03 TRANSMISSION Sub-section 03 (DRIVE PULLEY)
Using gouge chisel (semi-circular) such as snap on part noPPC 12 A, punch over the existing marks,
Gouge chisel !sami-circularl
,0,003003012
Punch over existing marks
,0,002003005
10,",12,13, Counterweight ass'y
Apply Loctite 242 or equivalent on nut threads then torque nuts to 13 Nm (115 Ibf-inL
Position the cap screw and torque to 85 N-m (63 Iht.ftlInstall drive belt, pulley guard and close cabAccelerate vehicle and bring at intermediate speed then at the same time apply brakeRepeat or timesStop engine and retorque cap screw