1986 Ski-Doo Factory Shop Manual, Page 242Get this manual
Section 02 ENGINE Sub-section 13 (REWIND STARTER)
REMOVAL
1,2,3Starter housing, lock washersscrews
Remove screws and washers securing rewind starter to engine then remove rewind starterNOTE: On some models the hood requires sup porting before removing starter housing(The retaining cable is attached to one of the rewind starter attaching bolts),
ASSEMBLY
4,5, Rewind springspring guide
At assemblypOSition spring outer end into spring guide notch then wind the spring clockwise into guideWARNING: Since the spring is tightly wound Inside the guide it may fly out when the guide is handledAlways handle with care+
On fan cooled models with oil injection pump remove pump from rewind starter cover
DISASSEMBLY
To remove rope from rewind starter mechanism:
9,10,11,12,13, Pawl, pawl lockcirclip, lock springlock ring
- First remove lock ringlock spring, circlip, pawl lock and pawl