1986 Ski-Doo Factory Shop Manual, Page 166Get this manual
Section 02 SUb-section 08
(532 ENGINE TYPE)
20, Crankcase studs
Because of cap nuts, cylinder studs have to be screwed into the crankcase so that they do not protrude by more than 56.5 mm (2.2")
10,12Crankcasecylinder nutscylinders
When reassembling the cylinders to the crankcase, it is important to have them properly aligned so that the dar head holes will match up with the studsA special per illustration cylinder head itself! can be tool llsed 10 align the cylindersCross torque cylinder nuts
to 21 N.m (16 Ibf.ftl-
Aligning tools
420 876 570
AO'600l00
Apply "Loctite 242" blue medium strength on the threaded end of the studs going into the crankcase