1986 Ski-Doo Factory Shop Manual, Page 53Get this manual
Section 02 ENGINE Sub-section 02 (253 ENGINE TYPE)
- Solder the yellow wire in the harness IO the white tube protected wire of the coil- Solder the yellowblack striped wire in the harness to the black tube protected wire of the coil
Black protector with yellowblack wire of harness
White protector with vellow wire of harness
- Position protector tubes over connections- Prior to assembly, apply Loctite 242 (blue, medium strength) on the lighting coil screws- Fasten retaining clip onto protector tubes CAUTION: Before reinstalling magneto, remove
the loose epoxy from harness
ASSEMBLY
23,28,29,30, Armature platemagneto flywheel, lock washernut