1985 Ski-Doo snowmobile Service Manual, Page 451Get this manual
Section 07 CHASSIS Sub-section 01 (HOOD)
Damaged area have to be sanded 25 mm (1 ") to 35 mm (1 12") all around using 180 grit sand paper Check surface for proper smoothnessUsing chloronated solvent, remove any dirt or oil spills from the inside area then sand or scuff with 80 grit sand paper at least 50 mm (2") all around damaged area on the inside surfaceApply 3Mautobody repair tape
Let filler set and dry for 20 to 30 minutesIf required, sand and apply finishing coat and allow to dry
S"",h,d '" 'h"has been sanded "
AOO 1007005
Use one of these two lacquers:
AOO1007003