1985 Ski-Doo snowmobile Service Manual, Page 411Get this manual
Section 05 SUSPENSION Sub-section 05 (PRS SUSPENSION)
Torque screws to these valves (see illustration)SCREW LOCATION
Retainer plate Iside and underneath I
Shock pivot
9,11,89, Idler wheelgrease fitting
Even if there are grease fittings on idler wheels, do not lubricate, since ball bearings are sealed on both sides
DESCRIPTION
TORQUE TO
25 Nm (18 Ibt.tt)
NOTE: To adjust the track tension and alignment, refer to section 05-08
M10 25 mm M10 35 mm
48 N.m 135 Ibt.tt) 48 N.m (35 ibt.ttl
Rear arm
SHOCK ABSORBER SPRING REPLACEMENT