1985 Ski-Doo snowmobile Service Manual, Page 386Get this manual
Section 05 SUSPENSION Sub-section 02 (SLIDE SUSPENSION)
Left hand side
7,9, Rivetsreinforcement bracket
To remove rivet use 3116" diadrillAt assembly secure reinforcement bracket to runner with two (2) 10-32 12" bolts and nuts
6,13, Front arm bracketfront idler shaft
The front idler shaft must be positioned in the front hole of the front arm bracket
A007005001
12,56, Screwscross shafts
Remove the four (4) screws securing front and rear arm to frameRemove suspension systemAOO700500J
Rear of vehicle
NOTE: To prevent cross shaft from turning within
the suspension arm, wedge the blade of small screwdriver between the shaft and suspension arm
33, Adjustment cams
At assembly, position the adjustment cams at the iowest positionRight hand side