1985 Ski-Doo snowmobile Service Manual, Page 270Get this manual
Section 03 TRANSMISSION Sub-section 04 (DRIVEN PULLEY)
33, Cotter pin
Reinstall new cotter pin
Torque wrench length cm (in)Correction factor Torque wrench length4.44 cm ('.750 in) Torque wrench reading Correction factor Ex: Torque wrench length: 25.4 cm (10 in) Torque wrench reading: 60 N-m (45 Ibf-ft) Correction factor ,2p-5,.4,c-::-m:-:-;(",OI-:-n,I,crr-:-:-=;-;-,-,- 25.4 cm (10 In)4.44 cm (, .750 inl Real reading 60 N-m (45 Ibf-ft) 85
= Real reading
Pulley alignement
For pulley alignment procedurerefer to section 03-05
14, 16,44, Adjuster nut, jam nut" Loctite 277"
Apply "Loctite 277" or equivalent on threads of both nutsTorque jam nut to 60-70 B-m (45-52 Ibf-ft)To torque the jam nut, it is necessary to make the followinq tool or use Snap On extension key noFC-40Torque to: 60-70 N-m (45-52 Ibf-ft)=