1984 Ski-Doo Shop Manual, Page 341Get this manual
SECTION 05 SUSPENSION
SUB-SECTION 02 (SLIDE, MXTRS SUSPENSION)
36, Stopper strap
- Attach front stopper strap at 3rd hole(TYPICAL)
NOTE: The front adjustment holes in the frame (near footrest) are not completely drilledIf you have to relocate the front and rear arms you have to drill these holes
11,56, Adjustment platepivot arm
When repositionning front and rear suspension arms: ensure that the pivot arm is as perpendicular as possible by locating it in the first or second holes of the adjustment plate Second hole
- Remove chaincase vent hole plug
NOTE: On all models, the holes in the frame provide the possibility of locating the suspension arms for easier track tension adjustment 13 mm (1 2") clearanceIt means that if the slide suspension adjustment screws are at the maximum adjustment and the suspension arms are at the front holes in the frame, you may move the suspension arms at the rear holes and obtain greater track tension adjustment