1984 Ski-Doo Shop Manual, Page 339Get this manual
SECTION 05 SUSPENSION SUB-SECTION 02 (SLIDE, MXTRS SUSPENSION)
Left hand side
7,8,52, Reinforcement strips, rivetsreinforcement bracket
Lowest position
"31,35,66, Screwscross shafts
Remove the four (4) screws securing suspension to frameRemove suspension systemNOTE: To prevent cross shaft from turning within the suspension arm, wedge the blade of small screwdriver between the shaft and suspension arm
To remove rivet use 316" diadrillAt assembly secure reinforcement brackets to runner with two (2) 10-32 12" bolts and nuts, and five (5) bolts and nuts for the reinforcement strips
28, Adjustment cams
At assembly, position the adjustment cams at the lowest position
Right hand side
DISASSEMBLYASSEMBLY
1,2,3,4,5, Runners, slider shoes, screws, stop nutsspiral pins
To replace wrn slider shoe, remove the rear spiral pin, the front screw and stop nut, then slide the shoe rearwards out of the runnerLeft hand side