1984 Ski-Doo Shop Manual, Page 307Get this manual
SECTION 04 ElECTR ICAl
SUB-SECTION 06 (TESTING PROCEDURE)
ANALYSER TEST AND MAINTENANCE
A test simulator is provided with each tester as means to test the lamp, detector circuit, and batteries
4Carefully install cover on case being certain that no wires are pinched between cover and caseSecure cover
NOTE: Weak batteries will not impair tester operation or calibrationThe light will glow dim
High scale test
a) Place switch in HIGH positionPlug the simulator into an electric outlet (117 AC) for ten seconds_ CAUTION: After charging, do not touch plug ter minals while pressing test buttonA mild shock will resultb) Remove the simulator from the outlet, and connect the "P" and "N" leads from the tester to the simulator as indicated on the button of the simulatorc) Set the tester dial to 50, or belowDepress the button of the simulatorThe indicator lamp on the tester should light
The ignition tester may give false readings if the rivets on the back cover come in contact with metal