1984 Ski-Doo Shop Manual, Page 138Get this manual
SECTION 02 ENGINE SUB-SECTION 07 (534 ENGINE TYPE)
20, Crankcase studs
Because of cap nuts, cylinder studs have to be screwed into the crankcase so that they do not protrude by more than 56 .5 mm (2.2")
10,12, Crankcasecylinder nuts and cylinders
When reassembling the cylinders to the crankcase, it is important to have them properly aligned so that the cylinder head holes will match up with the studs special tool (as per illustration) (or cylinder head itself) can be used to align the cylinders Cross torque cylinder nuts to 22 N.m (16 ft.lbs)