1984 Ski-Doo Shop Manual, Page 128Get this manual
SECTION 02 ENGINE SUB-SECTION 06 (503 ENGINE TYPE)
The ground terminal from generating coil must be fastened under th is clip
CAUTION: Before reinstalling magneto, remove the loose epoxy from harness
ASSEMBLY
1, Armature plate
Position armature plate on crankcase, aligning marks on both parts
7, "Loctite 242"
Clean crankshaft extension taper Apply "Loctite 242" (blue medium strength) on taper
11,19, Flywheel, woodruff key
lockwasher
magneto