1983 Ski-Doo Shop Manual, Page 243Get this manual
SECTION 05 SUSPENSION SUB-SECTION 02 (SLIDEMX SUSPENSIONS)
DISASSEMBLYASSEMBLY
At assemblyadjustment cam must be installed to
that hexagonal projection on cam is located toward front of vehicle
CD To replace worn slider shoe, remove the rear spiral pin Slide the shoe rearwards out of the runner
CD To remove the rivets securing the adjustment plate on the front arm supports, cut off the rivet heads using cold chiselAt assembly, position the rivet head on suitable metal block and hold the assembly firmly in placeWith flat head punch and hammer secure the rivet in place