1982 Ski-Doo Shop Manual, Page 351Get this manual
SECTION 06 STEERINGSKIS SUB-SECTION 02 (SKI SYSTEM)
CLEANING
Clean all metal components in non ferrous metal cleaner
Tighten stabilizer arm nuts equally on both arms
CD Clean bushing seat with Loctite Safety Solvent or Acetone WARNING: This procedure must be performed in well ventilated area
3 Thread (app on both stabilizer arm screws
SHOCK SERVICING
See section 05-02_ CAUTION: The front and rear shocks have different valving calibration and therefore must not be interchangedEnsure that the shocks are properly positionedRefer to the part number stamped on the shock body(Front shock: PIN 4144664 00 and rear shock: PIN 4144764 00
Shock installation
Reinstall shocks absorber as shownTorque the screws to 61 N-m (45 ft-IbslLower shock bushing
ASSEMBLY
CD Apply Loctite RC 680 or equivalent on bushing and seat and push bushing in using appropriate pusher or piece of wood Repeat for the other bushing