1982 Ski-Doo Shop Manual, Page 316Get this manual
SECTION 05 SUSPENSION SUB-SECTION 02 (SLIDEMX SUSPENSIONS)
REMOVAL
Release track tension by loosening adjuster bolts located on inner side of rear idler wheels
DISASSEMBLYASSEMBLY
Q),G )(3)To replace worn slider shoe, remoye the screw and spiral pinSlide the shoe rearwards out of the runnerTo remove the rivets securing the adjustment plate on the front arm supports, cut off the rivet heads using cold chiselAt assembly, position the rivet head on suitable metal block and hold the assembly firmly in place With flat head punch and hammer secure the rivet in place,