1980 Ski-Doo Shop Manual, Page 202Get this manual
SECTION 04 SUB-SECTION 02, (ELECTRICAL TESTS)
TWO CYLINDER ELECTRONIC IGNITION ENGINE
6GENERATOR COIL OUTPUT 7TRIGGER COIL OUTPUT
Magneto side: P.T.Oside: Connect tester lead to white wireConnect tester lead to whitered wire
1Disconnect wire connectors from C.Delectronic boxes2Using one (1) harness adaptorconnect tester test lead to red wire of one of the two connectors removed from C.D.Ielectronic boxesConnect test lead to ground; do not use brown wire as ground
1Disconnect electronic box connectors
Connect tester lead to good engine ground
2Set tester sWitch and dial as follows:
Connector of one of the twoelectroniC boxes -y
3Set tester sWitch and dial as follows:
Engine type Switch position HIGH Dial Engine type
Switch position