1980 Ski-Doo Shop Manual, Page 134Get this manual
SECTION 03 SUB-SECTION 02, (ENGINES)
0To replace condenser, it is first necessary to unsolder the two (2) black leads using soldering ironThe condenser can then be driven out of the armature plate using suitable pusher and hammerTo reinstall, inverse procedureWhen replacing contact breakersapply light coat of grease on lubricating wickTo remove or Install magneto retaining nut, lock crankshaft in position with special hold-on support as illustrated(See Tools section)
With magneto retaining nut removed, install special puller onto hold-on supportTighten puller bolt and at same time, tap on bolt head using hammer to release magneto from its taper