1980 Ski-Doo Shop Manual, Page 65Get this manual
SECTION 03 SUB-SECTION 02, (ENGINES)
When positioning P.T.Oouter bearing on crankshafta gap of 0.5 mm (.020") must be left between bearing and labyrinth sleeve to avoid axial forces to the beaflng
SECTION 03 SUB-SECTION 02, (ENGINES)
When positioning P.T.Oouter bearing on crankshafta gap of 0.5 mm (.020") must be left between bearing and labyrinth sleeve to avoid axial forces to the beaflng