1978 Ski-Doo Shop Manual, Page 48Get this manual
SECTION 02 SUB-SECTION 03 (DRIVE PULLEY)
Teflon impregnated cloth
Teflon coating- "Duraton"
bushing-t
Apply "Loctite 242" on threads, then tighten until screw slightly rests against bottom of "Duralon" bushing hole_ CAUTION: Be careful when installing sliding half assembly on square shaft of drive pulley to avoid scratches on "Duralon" bushing caused by square shaft edgeTorque to Nsrn (4 ft-lbs)At reassembly, apply "Loctite 242" on threads and torque to 16 N.m (12 ft-lbs)_ CAUTION: Do not disassembly counterweight unless replacement is necessaryTeflon impregnated cloth
Teflon impregnated cloth