1974 Ski-Doo Shop Manual, Page 181Get this manual
TEST NO.6 CONDENSER CAPACITY TEST 1Unsolder the wire(s) located on top of condenser2Plug the analyser cord into 115 volts, 60 cycle, AC ou tlet3Place analyser selector switch to position No.4 CONDENSER CAPACITY4Connect the red test lead to condenser lead weld ment5Connect the black test lead to armature plate (ground) 6Depress red button and read scale No.4Condenser capacity must be between .26 to .30 mfd, if not, replace the defective condenserIf condenser is within spec ification do not resolder wire(s) on condenser but pro ceed with test no7