1974 Ski-Doo Shop Manual, Page 5Get this manual
REMOYAL
Lift and block rear of vehicle off the groundRemov,e
Always pull or push the bearing by inner race When assembl ing, always position new seal
the link plate spring lock nuts and retainer
When inserting seals into link plate, seal lip must sit correctly in groove of link plateAfter lubricating the rear axle, ensure that seals remain in position
Using link plate spring lever (See Tool Section), unlock link platesprings, Rerjlove track adjuster bolts, eye bolts, hardener washers and adjuster sleeves Withdraw rear axle from vehicle
& ,bISASSEMBLY andASSEMBLY factory rivetedWhen ,0Idler wheels sprockets are
sparation